Yokogawa digitalYEWFLO (DY) - Manual (Page 83)

<9. OPERATION VIA HART CONFIGURATION TOOL (HART 7)>
9-11
IM 01F06A00-01EN
• Simulation Setting and Correlation of Output Value
: Without option code /MV
Simulation
Setting value
Output value
Flow rate Total fl ow rate Process temperature Process density Contact output PV % Range Loop Current
Flow rate Yes Yes No No Yes Yes Yes
Total fl ow rate No Yes No No No No No
Process
temperature
No No Yes No No No No
Process density No No No Yes No No No
PV % Range No No No No No Yes Yes
Loop Current No No No No No No Yes
Yes : Simulation value or calculation result of Simulation.
No : Actual process value or parameter setting value.
: With option code /MV
: Function == “Monitor only”
: Function == “Saturated Steam” or “Superheat
Steam” or “LIQUID:Mass”
: Function == “Gas:STD/Normal”
: Function == “Not use”
Simulation
Setting value
Output value
Flow rate Total fl ow rate Process temperature Process density Contact output
Flow rate Yes Yes No No Yes
Total fl ow rate No Yes No No No
Process
temperature
No
No Yes
Yes
No
Yes
Yes
No
Yes
Process density
No
No No Yes
No
Yes
Yes
Yes
PV % Range No No No No No
Loop Current No No No No No
Simulation
Setting value
Output value
PV= Instaneous fl ow rate PV= Process temperature
PV % Range Loop Current PV % Range Loop Current
Flow rate
Yes Yes
No
No
Not available
Not available
Total fl ow rate
No No
No
No
Not available
Not available
Process
temperature
No
No
Yes
Yes
Yes
Yes
Not available
Not available
Process density
No
No
No
No
Yes
Yes
Not available
Not available
PV % Range
Yes Yes
Yes
Yes
Not available
Not available
Loop Current
No Yes
No
Yes
Not available
Not available