Yokogawa digitalYEWFLO (DY) - Manual (Page 35)

<5. BASIC OPERATING PROCEDURES>
5-7
IM 01F06A00-01EN
5.4.2 Data Setting Method
 Input method of numeric data
Example 1: Change the span from 100m 3 /h to 150m 3 /h
The setting mode can be changed referring to Section 6.3 “Parameters List.”
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
F0508.ai
Press “ SET ” key.
Press “ SET ” key.
Press “ SHIFT ” key any time.
Press “ INC ” key any time.
Press “ SET ” key.
Press “ SET ” key.
Press “ SET ” and “ SHIFT ” key.
Indication of % flow
rate.
Enter to the setting
mode.
(Span number is
“ B10 ”)
Enter to data number
item.
Move the position to
input the data.
Set “ 5 ” and indicate
“ 150m
3 /h ”.
Ensure the setting
data.
Complete the Setting.
Return to display
mode.
IMPORTANT
After setting a parameter, keep the power on for
at least 30 seconds.
If the power of fl owmeter is turned off, a
parameter setting is released.