Yokogawa digitalYEWFLO (DY) - Manual (Page 36)

<5. BASIC OPERATING PROCEDURES>
5-8
IM 01F06A00-01EN
 Input method of selection items
Example 2: Change the pulse output to alarm output.
The setting mode can be changed referring to Section 6.3 “Parameters List.”
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
F0509.ai
Press “ SET ” key.
Press “ SHIFT ” key.
Press “ INC ” key any time.
Press “ INC ” key any time.
Press “ SET ” key.
Press “ SET ” key.
Press “ SET ” key.
Press “ SET ” and “ SHIFT ” key.
Indication of % unit.
Enter to the setting
mode.
Enter to the
parameter item.
Indicate “ 20 ”.
Enter to the data
input item.
Indicate “ 03 ” of
alarm output item.
Ensure the setting.
Finish the parameter
setting.
Return to display
mode.
IMPORTANT
After setting a parameter, keep the power on for
at least 30 seconds.
If the power of fl owmeter is turned off, a
parameter setting is released.