Yokogawa digitalYEWFLO (DY) - Manual (Page 33)

<5. BASIC OPERATING PROCEDURES>
5-5
IM 01F06A00-01EN
5.3.2 Indicate the Total Rate in the Data Display(Lower)
The display mode can be changed referring to Section 6.3 “Parameters List.”
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
SET
INC SHIFT
F0505.ai
Press “ SET ” key.
Press “ SHIFT ” key.
Press “ INC ” key any time.
Press “ SET ” key.
Press “ INC ” key.
Press “ SET ” key.
Press “ SET ” key.
Press “ SET ” and “ SHIFT ” key.
Indication of
engineering unit
display.
Lower display is
“ Blank ”.
Enter to the setting
mode.
Enter to the
parameter item.
Indicate “ 31 ”.
Enter the data input
item.
Indicate “ 01 ” of
lower the display
item.
Ensure the setting
data.
Finish the setting.
Return to display
mode.
IMPORTANT
After setting a parameter, keep the power on for
at least 30 seconds.
If the power of fl owmeter is turned off, a
parameter setting is released.