beautypg.com

ZOLL X Series Monitor Defibrillator Rev D User Manual

Page 85

background image

Removing the EtCO2 and NIBP Modules

9650-001356-01 Rev. D

X Series Service Manual

79

8

Disconnect the 5 NIBP tubes.

9

Disconnect the 2 red
connectors, then remove the
4 screws (top 2 screws have
washers) securing the NIBP
MOD G board. Lift NIBP
MOD G board and pump out.

Note: During reassembly,
align connector on bottom of
NIBP board to monitor board.
Torque screws to 6 in-lbs.

Note: During reassembly, put
the hose on left side of fan
through the middle slot, and
the hose on the right through
in the bottom slot.