beautypg.com

ZOLL X Series Monitor Defibrillator Rev D User Manual

Page 79

background image

Removing the Display Module

9650-001356-01 Rev. D

X Series Service Manual

73

2

Using the 6mm socket
wrench, remove the hex
standoff located underneath
the screw you just removed.

Note: During reassembly,
torque to
6 in-lbs.

3

Place the back of the unit
down on the mat so that the
display screen is facing up.

4

Remove the six (6) screws
from the front of the casting in
the areas illustrated.

Note: During reassembly,
torque screws to 6 in-lbs.