ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 53)

Maintenance Tests
9650-001356-01 Rev. D ZOLL X Series Service Manual 47
27.0 Audio Recording Test (Optional)
Equipment USB2.0 Thumb Driive (1-4GB)
PC w/ Windows media player and speakers
Do This... Observe This... Pass/Fail
27.1 Power unit on, press the LOG softkey,
then press the TRASH icon softkey.
Highlight YES, and press enter to clear
the log.
27.2 Turn the unit Off, and then back On. Verify “Self-Test Passed” message
is displayed. o o
27.3 Wait 15 seconds after the “Self-Test
Passed” message disappears, and speak
loud and clear into the unit’s microphone:
“Test, one two three”
27.4 Press the LOG softkey to access the log,
and then press the USB icon softkey to
access USB
27.5 Insert USB thumb drive onto USB port. Verify the USB symbol to display
at the top of a screen. o o
27.6 Highlight TRANSFER ALL CASES and
press Enter.
Wait for file transfer to USB
thumb drive to complete. o o
27.7 Remove USB thumb drive from the unit,
then highlight OK and press Enter, then
press HOME softkey to exit the Log
Transfer Menu.
27.8 Insert USB thumb drive onto PC, and
then navigate to USB thumb drive via
Windows Explorer.
27.9 Right click on the recently .OGG file and
select Play (Windows media player will
play this audio file).
Verify if the words that you spoke
(Test, One Two Three), are clearly
heard in the playback. o o
27.10 Close the Windows media player.
27.11 Using Windows Explorer, highlight all
files at USB thumb drive. Right click on
the highlight and select Delete
Click YES to confirm all files on USB
thumb drive to be deleted.
Verify file has been removed. o o
27.12 Remove USB thumb drive.