ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 12)

C HAPTER 1 M AINTENANCE T ESTS
6 9650-001356-01 Rev. D
This chapter describes the following maintenance tests:
• 1.0 Physical Inspection of the Unit
• 2.0 Operational TestsOperational Tests
• 3.0 Leads Test
• 4.0 Heart Rate Display Test
• 5.0 Heart Rate Alarm Test
• 6.0 Power Supply Test
• 7.0 Leakage Current Test
• 8.0 Shock Test
• 9.0 Advisory Test
• 10.0 Synchronized Cardioversion Test
• 11.0 Pacer Test
• 12.0 Printer Test
• 13.0 Treatment Report Test
• 14.0 SpO2 Test (for SpO
2
feature without SpCO and SpMet)
• 15.0 SpO2, SpCO, and SpMet Test (for SpO
2
feature with SpCO, or SpCO and SpMet)
• 16.0 EtCO2 Calibration (required for annual calibration)
• 17.0 EtCO2 Calibration Check
• 18.0 EtCO2 Test
• 19.0 IBP Test
• 20.0 NIBP Calibration Check
• 21.0 NIBP Leak Test
• 22.0 Deflation Test
• 23.0 Inflation Test
• 24.0 NIBP Test
• 25.0 Temperature Test
• 26.0 Wi-Fi Test (Optional)
• 27.0 Audio Recording Test (Optional)
Before You Begin the Maintenance Tests
• Assemble the tools listed in following section, “Equipment You Need to Perform the
Maintenance Tests.”
• Keep an extra fully charged X Series battery available.
• Schedule an hour to conduct the entire maintenance test.
• Perform the tests in the order presented.
• Perform all the steps of each test procedure.
• Complete all the steps of the procedure before evaluating the test results.