Vanguard ATRT-03_03B S2 - Manual (Page 99)

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
94
m. If the test plan included multiple tests, the start-up screen for the next test will be
displayed as shown:
Repeat steps h through l for this test.
n. The following screen will be displayed after the last defined test in the test plan has
been performed:
Press any key to continue.
o. The following screen will be displayed:
Press the [1] key (YES) to save the test record to the unit’s Flash EEPROM.
p. The following screen will be displayed momentarily:
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1. YES
2. NO
END OF TEST PLAN
TAP NUMBER 2
H VTG: 4160
X VTG: 240
"START" TO RUN TEST