Vanguard ATRT-03_03B S2 - Manual (Page 114)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
109
1. ERASE SINGLE PLAN
Press the [1] key (ERASE SINGLE PLAN) to erase a single test plan from the
connected USB Flash drive. The following screen will be displayed:
Type the test plan number using the alpha-numeric keypad and then press
the
[ENTER] key. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL PLANS
Press the [2] key (ERASE ALL PLANS) to erase all test plans from the
connected USB Flash drive. The following warning screen will be displayed:
If you do NOT want to erase all the test plans from the connected USB Flash
drive, press the
[STOP] key. You will be returned to the “START-UP” menu.
ERASE ALL THUMB DRIVE
TEST PLANS!
ARE YOU SURE?
"ENTER" TO CONTINUE
THUMB DRIVE PLAN_000
ERASED!
ERASE THUMB DRIVE
PLAN_
ERASE TEST PLAN
1.
ERASE SINGLE PLAN
2. ERASE ALL PLANS