Vanguard ATRT-03_03B S2 - Manual (Page 95)

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
90
c. The following screen will be displayed:
1. INTERNAL STORAGE
Press the
[1]
key (INTERNAL STORAGE) to load a test plan from the unit’s Flash
EEPROM. Continue to step d.
2. THUMB DRIVE
Press the
[2]
key (THUMB DRIVE) to load a test plan from the connected USB Flash
drive. The following screen will be displayed:
Type the test plan number to load from the USB Flash drive and then press the
[ENTER] key.
The following screen will be displayed:
Press the [2] key (NO) to not save the test plan in the unit’s Flash EEPROM and to
just load it in the working memory. The test plan will be loaded in the working
memory and you will be returned to the “START-UP” menu. Continue to step e to
perform a test using the loaded test plan.
Press the [1] key (YES) to load the test plan to the working memory and also save it
in the unit’s Flash EEPROM. The following screen will be displayed:
PLAN_000 LOADED!
SAVE PLAN INTERNALLY?
1. YES
2. NO
LOAD THUMB DRIVE TP
PLAN_:
1. INTERNAL STORAGE
2. THUMB DRIVE