Vanguard ATRT-03_03B S2 - Manual (Page 115)

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
110
To proceed with erasing all the test plans from the connected USB Flash
drive, press the
[ENTER] key. All test plans will be erased from the USB
Flash drive and the following message will be displayed:
Press any key to return to the “START-UP” menu.
d. The following screen will be displayed:
1. ERASE SINGLE PLAN
Press the [1] key (ERASE SINGLE PLAN) to erase a single test plan from the unit’s
internal Flash EEPROM. The following screen will be displayed:
Type the test plan number using the alpha-numeric keypad and then press the
[ENTER] key. The test plan will be erased and the following message will be
displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN NUMBER 1
ERASED!
ERASE TEST PLAN
NUMBER:
ERASE TEST PLAN
1.
ERASE SINGLE PLAN
2. ERASE ALL PLANS
all thumb drive
test plans erased!