Vanguard ATRT-03_03B S2 - Manual (Page 68)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
63
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the ATRT-03 S2’s “USB MEM” port,
the following screen will be displayed instead of the above screen:
Press the [1] key (INTERNAL STORAGE).
The following screen will be displayed:
Continue with the steps below.
1. ENTER RECORD NUMBER
Press the [1] key (ENTER RECORD NUMBER) if you know the record number that
you would like to restore.
1.1. The following screen will be displayed:
Type the record number using the alpha-numeric keypad and then press
the
[ENTER] key.
RESTORE RECORD
NUMBER:
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT
1.INTERNAL STORAGE
2.THUMB DRIVE
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT