Vanguard ATRT-03_03B S2 - Manual (Page 106)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
101
3.6.5. Printing a Test Plan (ATRT-03 S2 and ATRT-03A S2 Only)
Follow the steps below to print a test plan from the internal Flash EEPROM or from a connected
USB Flash drive:
a. Start from the “START-UP” menu:
Press the [3] key (TEST PLANS).
b. The following screen will be displayed:
Press the
[4]
key (PRINT TEST PLAN).
If a USB Flash drive is connected to the unit, continue to step c.
If a USB Flash drive is NOT connected to the unit, continue to step d.
c. The following screen will be displayed:
1. PRINT INTERNAL TP
Press the
[1]
key (PRINT INTERNAL TP) to print a test plan from the unit’s
internal Flash EEPROM. Continue to step d.
2. PRINT FLASH DRV TP
Press the [2] key (PRINT FLASH DRV TP) to print a test plan from a connected
USB Flash drive. The following screen will be displayed:
1. PRINT INTERNAL TP
2. PRINT FLASH DRV TP
1. LOAD TEST PLAN
2. UNLOAD TEST PLAN
3. PLAN DIRECTORY
4. PRINT TEST PLAN
5. ERASE TEST PLAN
6. SAVE TEST PLAN
7. COPY TO THUMB DRIVE
1. RUN TEST
2. SETUP
3. TEST PLANS
4. DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10