Vanguard ATRT-03_03B S2 - Manual (Page 82)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
77
3.5.6. Printing a Test Record Directory (ATRT-03 S2 and ATRT-03A S2 Only)
Follow the steps below to print a directory of the test records stored in the unit’s Flash EEPROM
or on a connected USB Flash drive (ATRT-03 S2 and ATRT-03A S2 only):
a. Start from the “START-UP” menu:
Press the [2] key (SETUP
b. The following screen will be displayed:
Press the [4] key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) is listed only if a USB Flash drive is
connected to the unit.
Press the [3] key (RECORD DIRECTORY)
If a USB Flash drive is connected to the unit, continue to step d.
If a USB Flash drive is NOT connected to the unit, continue to step e.
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY TO THUMB DRIVE
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
1. RUN TEST
2. SETUP
3. TEST PLANS
4. DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10