Vanguard ATRT-03_03B S2 - Manual (Page 113)

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
108
3.6.8. Erasing Test Plans
Follow the steps below to erase a test plan from the unit’s Flash EEPROM or from a connected
USB Flash drive:
a. Start from the “START-UP” menu:
Press the [3] key (TEST PLANS).
b. The following screen will be displayed:
ATRT-03 S2 and ATRT-03A S2 ATRT-03B S2
Press the
[5]
key (ERASE TEST PLAN) Press the
[4]
key (ERASE TEST PLAN)
If a USB Flash drive is connected to the unit, continue to step c.
If a USB Flash drive is NOT connected to the unit, continue to step d.
c. The following screen will be displayed:
1. ERASE INTERNAL PLAN
Press the [1] key (ERASE INTERNAL PLAN) to erase test plans from the unit’s
Flash EEPROM. Continue to step d.
2. ERASE THMB DRV PLAN
Press the
[2]
key (ERASE THMB DRV PLAN) to erase test plans from a connected
USB Flash drive. The following screen will be displayed:
1. ERASE INTERNAL PLAN
2. ERASE THMB DRV PLAN
1. LOAD TEST PLAN
2. UNLOAD TEST PLAN
3. PLAN DIRECTORY
4. ERASE TEST PLAN
5. SAVE TEST PLAN
1. LOAD TEST PLAN
2. UNLOAD TEST PLAN
3. PLAN DIRECTORY
4. PRINT TEST PLAN
5. ERASE TEST PLAN
6. SAVE TEST PLAN
7. COPY TO THUMB DRIVE
1. RUN TEST
2. SETUP
3. TEST PLANS
4. DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10