Vanguard ATRT-03_03B S2 User Manual
Page 49
REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
44
Press the
[ENTER]
key. The screen will be updated as shown below:
Type the X winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
Press the
[ENTER]
key. Continue to step f.
2. NO
Press the
[2]
key (NO) if you do not want to enter the transformer name plate voltage
values. Continue to step f.
f. The following screen will be displayed:
Press the
[START]
key to initiate the test.
g. The following screen will be displayed while the test is being performed:
test in progress
please wait...
"START" TO TEST
THREE PHASE OR
"STOP" TO ABORT
NAME PLATE VOLTAGE:
H : X
1,200 : 208
NAME PLATE VOLTAGE:
H : X
1,200 : 0