Vanguard ATRT-03_03B S2 - Manual (Page 92)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
87
d. The following screen will be displayed:
Press the [2] key (ERASE THUMB DRV REC).
e. The following screen will be displayed:
1. ERASE SINGLE REC.
Press the [1] key (ERASE SINGLE REC.) to erase a single test record from the
connected USB Flash drive. The following screen will be displayed:
Type the record number that you would like to erase using the alpha-numeric
keypad and then press the
[ENTER] key. If you do not know the test record
number, you can first print a test record directory using the instructions in section
3.5.6 (ATRT-03 S2 and ATRT-03A S2 only).
The test record will be erased from the USB Flash drive and the following screen will
be displayed:
THUMB DRIVE REC000
ERASED!
ERASE THUMB DRIVE
REC_
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC