Vanguard ATRT-03_03B S2 User Manual
Page 87
REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
82
3.5.8.
Erasing Test Records from the Flash EEPROM
Follow the steps below to erase test records from the Flash EEPROM:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
ATRT-03 S2 and ATRT-03A S2
ATRT-03B S2
Press the
[4]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[4]
key (ERASE RECORD).
d. The following screen will be displayed:
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT
1.
RESTORE RECORD
2.
SAVE RECORD
3.
RECORD DIRECTORY
4.
ERASE RECORD
1.
RECORD ID
2.
TEST VOLTAGE
3.
DISPLAY RECORD
4.
SAVE/RESTORE RECORD
5.
SET TIME
1.
RECORD ID
2.
TEST VOLTAGE
3.
PRINT RECORD
4.
SAVE/RESTORE RECORD
5.
SET TIME
1.
RUN TEST
2.
SETUP
3.
TEST PLANS
4.
DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10