Vanguard ATRT-03_03B S2 - Manual (Page 116)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
111
2. ERASE ALL PLANS
Press the
[2]
key (ERASE ALL PLANS) to erase all test plans from the unit’s
internal Flash EEPROM. The following warning screen will be displayed:
If you do NOT want to erase all the stored test plans from the unit’s Flash
EEPROM, press the
[STOP] key. You will be returned to the “START-UP” menu.
To proceed with erasing all the test plans from the unit’s Flash EEPROM, press
the
[ENTER] key. All test plans will be erased from the unit’s Flash EEPROM
and the following message will be displayed:
Press any key to return to the “START-UP” menu.
PLANS ERASED!
ERASE ALL PLANS!
ARE YOU SURE?
"ENTER" TO CONTINUE.