Vanguard ATRT-03_03B S2 User Manual
Page 85
REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
80
3.5.7. Viewing a Test Record Directory on the LCD Screen (ATRT-03B S2 Only)
Follow the steps below to view a directory of all the test records stored in the ATRT-03B S2’s
internal Flash EEPROM:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP)
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[3]
key (RECORD DIRECTORY).
d. The following screen will be displayed:
Press the
[PAPER ∧ Contrast]
or
[PAPER ∨ Contrast]
key to scroll through the
test record directory. The test record header will be displayed as shown:
RECORDS DIRECTORY
"UP" TO SCROLL FWD
"DWN" TO SCROLL RVS
1.
RESTORE RECORD
2.
SAVE RECORD
3.
RECORD DIRECTORY
4.
ERASE RECORD
5.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
TEST VOLTAGE
3.
DISPLAY RECORD
4.
SAVE/RESTORE RECORD
5.
SET TIME
1.
RUN TEST
2.
SETUP
3.
TEST PLANS
4.
DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10