Vanguard ATRT-03_03B S2 - Manual (Page 101)

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL
96
3.6.2. Unloading a Test Plan From the Working Memory
Follow the steps below to unload a test plan from the working memory:
a. Start from the “START-UP” menu:
Press the [3] key (TEST PLANS).
b. The following screen will be displayed:
Press the [2] key (UNLOAD TEST PLAN).
c. The test plan will be unloaded from the working memory, and the following screen will
be displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN UNLOADED!
1. LOAD TEST PLAN
2. UNLOAD TEST PLAN
3. PLAN DIRECTORY
4. PRINT TEST PLAN
5. ERASE TEST PLAN
6. SAVE TEST PLAN
7. COPY TO THUMB DRIVE
1. RUN TEST
2. SETUP
3. TEST PLANS
4. DIAGNOSTIC
TIME: 15:45:15
DATE: 07/20/10