Vanguard ATRT-03_03B S2 - Manual (Page 88)

ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL REV 2
83
NOTE
If you have a USB Flash drive inserted in the ATRT-03 S2’s “USB MEM” port,
the following screen will be displayed instead of the above screen:
Press the
[1]
key (ERASE INTERNAL REC).
The following screen will be displayed:
Continue with the steps below.
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) to erase a single test record from the unit’s
internal Flash EEPROM. The following screen will be displayed:
NOTE
You can cancel the process and return to the “START-UP” menu by pressing
the
[STOP] key.
Type the record number that you would like to erase using the alpha-numeric
keypad and then press the
[ENTER] key. If you do not know the test record
number, you can first print or view a test record directory using the instructions in
section 3.5.6 and 3.5.7, respectively.
ERASE RECORD
NUMBER:
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC