Burkert Type 8619 - Manual (Page 98)

96
Adjustmentandcommissioning
→
Immerse the cleancell in the reference solution: the multiCELL displays the
measured conductivity value of the solution
→
Enter the conductivity value of the ref-
erence solution used (indicated on the
bottle).
→
Modify the unit, if necessary.
Calibration Cond. manual calib Mx:conductivity
OK
F4
Manual calibration
5.023 µS/cm
5.000 µS/cm
Calibration result
Cell constant:
1.00000 /cm
The multiCELL displays the calibration result.
8.12. "Diagnostics" menu
8.12.1. modifying the "Diagnostics" menu access code
Refer to chap. 8.9 to access the Diagnostics menu. If the default access code "0000" is kept, the device does
not request it to access the Diagnostics menu.
Enter the new
DIAGNOSTICS
menu access code Confirm the new
code
Diagnostics System Code 0*** Confirm code 0***
8.12.2. monitoring the current or voltage value received on the
analogue inputs
This function is used to define the behaviour of the limits entered by the user are reached.
Refer to chap. 8.9 to access the Diagnostics menu.
Type 8619
english