Specifications of the memory card reader/recorder – Burkert Type 8619 User Manual
Page 18

16
Technicaldata
Analogue inputs ("AI")
• Any connection mode, in sink or source mode
• Galvanically insulated
• Accuracy: ±0,25%
• Current input: 0 - 22 mA or 3,5 - 22 mA. Max. voltage: 36 V DC.
Impedance: 50 W. Resolution : 1.5 µA
• Voltage input: 0 - 5 V DC or 0 - 10 V DC. Max. voltage: 36 V DC.
Impedance: 110 kW. Resolution: 1 mV
Electrical connection
• Per detachable 9-point set-screw connector, orange
• Refer to chap. 6.3.8 for the specifications of the connection
cables
6.3.4.
specifications of the additional outputs board "ouT"
Power consumption
0.1VA
All digital outputs ("DOx")
• Transistor
• Any connection mode, in NPN or PNP mode
• Galvanically insulated
• Protected against short circuits
• Max. voltage: 36V DC
• max. 700mA per transistor but max. 1A if both transistors are
connected
• Max. frequency 2000Hz
All analogue outputs ("AOx")
• 4-20mA current
• Any connection mode, in sink or source mode
• Galvanically insulated
• Protected against polarity reversal
• Max. loop impedance: 1100W at 36V DC, 610W at 24V DC,
100W at 12V DC
Electrical connection
• Per detachable 9-point set-screw connector, black
• Refer to chap. 6.3.8 for the specifications of the connection
cables
6.3.5.
specifications of the memory card reader/recorder
• Memory card type
• Capacity
• File system
• SD (Secure Digital)
• 2 Go max.
• FAT16
Type 8619
english