Saving the data on the memory card, Loading data from the memory card, English – Burkert Type 8619 User Manual
Page 43
41
Adjustmentandcommissioning
System
Parameters
Software options
Available options
Add new option
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
ENTERING
PID
Datalogger
Dosing
Flow
Concentration
When an option is ticked, it is activated in the device.
AVAILABLE OPTIONS : Read the options available, whether or not activated on the device:
-
PID: enables configuring of a PID function on the device; See chap. 8.10.14.
-
DATALOGGER: enables the saving of data; See chap. 8.10.18.
-
DOSING: enables configuring of the "Time dosing" and "Volume dosing" functions; See chap. 8.10.15 and 8.10.16.
This option automatically activates the "FLOW" option below.
-
FLOW: the "Flow" and "Totalizer" process inputs are available in the "PV" list on both the "M0:MAIN" board and the input
module "Mx:Inputs" (see chap. 8.16).
-
CONCENTRATION: the concentration tables for a number of solutions are available in the "Parameters" menu ->
"Mx:Conductivity" -> "Concentration" (see chap. 8.10.24)
ADD NEW OPTION : enter the activation code for an option.
8.10.5. saving the data on the memory card
This function is used to save the user parameters ("Parameters" menu) on the memory card in the M0:MAIN
board or on each module fitted.
• Insert a memory card in the device.
• Data can only be saved if the "datalogger" function is deactivated. See chap. 8.10.4 and
• The software options activated on the device (see previous chap.) cannot be transferred.
Refer to chap. 8.9 to access Parameters menu.
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
System
Parameters
Save settings
M0:MAIN
Mx:
... 1)
1)
The choices offered depend on the modules fitted and/or the options activated. See chap. 8.10.4 and chap. 8.16.
If an error message is displayed, refer to chap. 9.3.6.
8.10.6. loading data from the memory card
This function is used to load data from the memory card, initially saved on it.
the device receiving the data must be identical to the one from which these data originate.
• Check that both devices have the same order code and the same activated software options.
Refer to chap. 8.9 to access Parameters menu.
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
System
Parameters
Load settings
M0:MAIN
Mx:
... 1)
1)
The choices offered depend on the modules fitted and/or the options activated. See chap. 8.10.4 and chap. 8.16..
Type 8619
english