Burkert Type 8619 - Manual (Page 9)

7
Basicsafetyinformation
3. bAsic sAfeTy informATion
This safety information does not take into account:
• any contingencies or occurrences that may arise during assembly, use and maintenance of the device.
• the local safety regulations that the operator must ensure the staff in charge of installation and maintenance
observe.
Danger due to electrical voltage.
• Shut down and isolate the electrical power source before carrying out work on the system.
• Observe all applicable accident protection and safety regulations for electrical equipment.
various dangerous situations.
To avoid injury take care:
• to prevent any unintentional power supply switch-on.
• to carry out the installation and maintenance work by qualified and skilled staff with the appropriate tools.
• to guarantee a set or controlled restarting of the process after a power supply interruption.
• to use the device only if in perfect working order and in compliance with the instructions provided in the user
manual.
• to observe the general technical rules during the planning and use of the device.
• not to use this device in explosive atmospheres.
• not to use this device in an environment incompatible with the materials from which it is made.
• not to make any external modifications to the device such as for instance painting or varnishing any part of the
device.
• not to power the device with an AC voltage or a DC voltage higher than 36V DC.
nOTe
elements / components sensitive to electrostatic discharges
• This device contains electronic components sensitive to electrostatic discharges. They may be damaged if
they are touched by an electrostatically charged person or object. In the worst case scenario, these compo-
nents are instantly destroyed or go out of order as soon as they are activated.
• To minimise or even avoid all damage due to an electrostatic discharge, take all the precautions described in
the EN 100 015-1 norm.
• Also ensure that you do not touch any of the live electrical components.
This device was developed with due consideration given to accepted safety rules and is state-of-the-art.
However, risks may arise.
Failure to observe these instructions as well as any unauthorised work on the device excludes us from any liability and also
nullifies the warranty which covers the device and its accessories.
Type 8619
english