Burkert Type 8619 - Manual (Page 37)

35
Adjustmentandcommissioning
Calibration Cond manual calib Mx:Conductivity
2 4.294 S/cm
25.01 °C
0.0 0 0 µS/cm
Cond. calib.
Move the decimal point by
pressing to the far
right of the numerical value
and then on until the
decimal point is in the desired
place (the decimal point
moves in a loop)
Increment or decrement the figure selected by
pressing or
After confirming the entered
numerical value by pressing
"OK", modify the unit selected by
pressing or
Figure 25 : Example of a numerical value entering
• Access, for example, the pH value simulation function. Refer to chap. 8.9 to access "Tests" menu.
Tests PV:
Value:
Simulate PV M1:pH/ORP
ENTERING
pH
T
- 1 .000 pH
Simulation value
Select the character to the far left by pressing
and then allocate the "+" or "-" sign
by pressing .
To exit the "Tests" menu, press the dynamic key, "ABORT"
Figure 26 : Changing the sign of a numerical value
Type 8619
english