Burkert Type 8619 - Manual (Page 44)

42
Adjustmentandcommissioning
If an error message is displayed, refer to chap. 9.3.7.
8.10.7. restoring the default parameters of the process level and
the outputs
This function is used to restore (dynamic key "Yes") the default parameters of the Process level and outputs or
keep (dynamic key "No") the current parameters.
Refer to chap. 8.9 to access Parameters menu.
This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
System Parameters Factory reset M0:MAIN
Mx:
... 1)
8.10.8. customising the "user views 1 to 4"
Refer to chap. 8.9 to access Parameters menu.
2)
M0:None
Mx :
...
Display Parameters User view 1...4
Unit:
Filter: None
Fast
Slow
None
graph
Type:
2 lines
Title:
Line1...4:
ENTERING
PV:
3)
This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
4 lines
Period: ENTERING
y min: ENTERING
y max: ENTERING
1)
4)
4)
4)
1 line
1) If "Type" = 1, 2 or 4 "lines"
2) The choices offered depend on the modules fitted and/or the options activated. See chap. 8.10.4 and chap. 8.16..
3) The choices offered depend on the choice made in "PV" above
4) If "Type" = "graph"
TYPE: Choosing to display 1, 2 or 4 values (on 1, 2 or 4 lines) or a graph in the customised "Ux" view selected.
Type 8619
english