Bell & Gossett P2001487 Technologic Pump Controller - Manual (Page 33)

4.1.2 Setting LCP Display Values
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24 V DC supply.
The information displayed on the LCP can be customized
for user application.
• Each display readout has a parameter associated
with it
• Options are selected in the quick menu Q3-13
Display Settings
• Display 2 has an alternate larger display option
• The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable
Illustration 4.2 Display Readouts
Display Parameter number Default setting
1.1 0-20 Reference %
1.2 0-21 Motor current
1.3 0-22 Power [kW]
2 0-23 Frequency
3 0-24 kWh counter
Table 4.2 Legend to Illustration 4.2
4.1.3 Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Illustration 4.3 Menu Keys
Key Function
Status Shows operational information.
• In Auto mode, press to toggle between
status read-out displays
• Press repeatedly to scroll through each
status display
•
Press [Status] plus [
▲
] or [
▼
] to adjust the
display brightness
• The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Quick Menu Allows access to programming parameters for
initial set up instructions and many detailed
application instructions.
• Press to access Q2 Quick Setup for
sequenced instructions to program the basic
frequency controller set up
• Follow the sequence of parameters as
presented for the function set up
Main Menu Allows access to all programming parameters.
• Press twice to access top-level index
• Press once to return to the last location
accessed
• Press to enter a parameter number for
direct access to that parameter
Alarm Log Displays a list of current warnings, the last 10
alarms, and the maintenance log.
• For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
Table 4.3 Function Description Menu Keys
User Interface
30
4 4