Port configuration, Displaying connection status, Port configuration -63 – Asus GigaX2024SX User Manual
Page 88: Displaying connection status -63
![background image](/manuals/299344/88/background.png)
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display the
current connection status, including link state, speed/duplex mode, flow control,
and auto-negotiation.
Field Attributes (Web)
• Name – Interface label.
• Type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
• Flow Control Status – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or None)
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Trunk Member3 – Shows if port is a trunk member.
• Creation4 – Shows if a trunk is manually configured or dynamically set via
LACP.
Web – Click Port, Port Information or Trunk Information.
Figure 3-40. Displaying Port/Trunk Information
Field Attributes (CLI)
Basic Information:
• Port type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
• MAC address – The physical layer address for this port. (To access this item on
the web, see “Setting the Switch’s IP Address” on page 3-17.)
3-63