Asus GigaX2024SX - Manual (Page 249)

enable the learning function long enough to ensure that all valid VLAN
members have been registered on the selected port.
r time, you can manually add secure
addresses with the mac-address-table static command, or turn off port
long enough for new VLAN members
to be registered. Learning may then be disabled again, if desired, for security.
• A secure port has the following restrictions:
5, and sets the response to a
security violation to issue a trap message:
• To add new VLAN members at a late
security to re-enable the learning function
- Cannot use port monitoring.
- Cannot be a multi-VLAN port.
- Cannot be connected to a network interconnection device.
- Cannot be a trunk port.
• If a port is disabled due to a security violation, it must be manually re-enabled
using the no shutdown command.
Example
The following example enables port security for port
Related Commands
shutdown (4-151)
mac-address-table static (4-179)
show mac-address-table (4-181)
802.1x Port Authentication
The switch supports IEEE 802.1x (dot1x) port-based access control that prevents
unauthorized access to the network by requiring users to first submit credentials
for authentication. Client authentication is controlled centrally by a RADIUS server
using EAP (Extensible Authentication Protocol).
4-81