Asus GigaX2024SX - Manual (Page 214)

logging history
This command limits syslog messages saved to switch memory based on severity.
The no form returns the logging of syslog messages to the default level.
Syntax
logging history {flash | ram} level
n flash memory (i.e., permanent memory).
mory flushed on
reset).
• the levels listed below. Messages sent include the selected
el 0. (Range: 0-7)
no logging history {flash | ram}
• flash - Event history stored i
• ram - Event history stored in temporary RAM (i.e., me
power
level - One of
level down to lev
* There are only Level 2, 5 and 6 error messages for the current firmware release.
r priority (i.e.,
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
ommand Usage C
The message level specified for flash memory must be a highe
numerically lower) than that specified for RAM.
Example
4-46