Asus GigaX2024SX - Manual (Page 312)

4-190) takes precedence over port
Example priority (page 4-191).
spanning-tree transmission-limit
This command configures the minimum interval between the transmission of
the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
consecutive RSTP BPDUs. Use
spanning-tree cost
co
Th
•
; full duplex: 1,000,000; trunk: 500,000
,000; full duplex: 100,000; trunk: 50,000
This command configures the spanning tree pa
se the no form to restore the default.
th cost for the specified interface.
U
Syntax
cost cost spanning-tree
no spanning-tree cost
st - The path cost for the port. (Range: 1-200,000,000))
e recommended range is:
Ethernet: 200,000-20,000,000
: 20,000-2,000,000 • Fast Ethernet
• Gigabit Ethernet: 2,000-200,000
Default Setting
• Ethernet – half duplex: 2,000,000
half duplex: 200 • Fast Ethernet –
• Gigabit Ethernet – full duplex: 10,000; trunk: 5,000
Command Mode
4-144