Asus GigaX2024SX User Manual
Page 163
• IGMP Report Delay — Sets the time between receiving an IGMP Report for an
fore the switch sends an IGMP Query out of that
• IGMP Query Timeout — The time the switch waits after the previous querier
stops before it considers the router port (i.e., the interface which had been
ceiving query packets) to have expired. (Range: 300-500 seconds, Default:
. All systems on the subnet must support the same version.
are only enabled for IGMPv2, including IGMP Report
Query Timeout.
Snooping, IGMP Configuration. Adjust the IGMP settings as
n click Apply. (The default settings are shown below.)
IP multicast address on a port be
port and removes the entry from its list. (Range: 5-25 seconds, Default: 10)
re
300)
• IGMP Version — Sets the protocol version for compatibility with other devices
on the network. (Range: 1-2; Default: 2)
Notes: 1
2. Some attributes
Delay and IGMP
Web – Click IGMP
required, and the
Figure 3-82. IGMP Configuration
s example modifies the settings for multicast filtering, and then displays
CLI – Thi
the current status.
3-138