Asus GigaX2024SX - Manual (Page 103)

Command Usage
• Broadcast Storm Control is enabled by default.
• The default threshold is 32000 octets per second.
he switch.
Command Attributes
• Port – Port number.
• Trunk – Trunk number.
• Type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
• Threshold – Threshold as percentage of port bandwidth.
(Range: 64-95232000; Default: 32000 octets per second)
• Protect Status – Shows whether or not broadcast storm control has been
enabled. (Default: Enabled)
Web – Click Port, Port/Trunk Broadcast Control. Set the threshold, mark the
Enabled field for the desired interface and click Apply.
• Broadcast control does not effect IP multicast traffic.
• The specified threshold applies to all ports on t
Figure 3-48. Enabling Port Broadcast Control
CLI – Specify any interface, and then enter the threshold. The following disables
broadcast storm control for port 1, and then sets broadcast suppression at 600
octets per second for port 2.（which applies to all ports）
3-78