Asus GigaX2024SX - Manual (Page 140)

• Mode – Indicates VLAN membership mode for an interface. (Default: Hybrid)
as an end-point for a VLAN trunk. A trunk is a direct
ansmits tagged frames that identify the
source VLAN. Note that frames belonging to the port’s default VLAN (i.e.,
.
* Timer settings must follow this rule: 2 x (join timer) < leave timer < leaveAll timer
Web – Click VLAN, 802.1Q VLAN, Port Configuration or VLAN Trunk
Configuration. Fill in the required settings for each interface, click Apply.
- 1Q Trunk – Specifies a port
link between two switches, so the port tr
associated with the PVID) are also transmitted as tagged frames.
- Hybrid – Specifies a hybrid VLAN interface. The port may transmit tagged or
untagged frames.
• Trunk Member – Indicates if a port is a member of a trunk. To add a trunk to the
selected VLAN, use the last table on the VLAN Static Table page
Figure 3-66. Configuring VLANs per Port
CLI – This example sets port 3 to accept only tagged frames, assigns PVID 3 as
the native VLAN ID, enables GVRP, sets the GARP timers, and then sets the
switchport mode to hybrid.
3-115