Asus GigaX2024SX - Manual (Page 252)

d
and sets the dot1x mode on a port interface. Use the no form to
restore the default.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
client to be authorized by the
re will be denied access.
• force-authorized – Configures the port to grant access to all clients, either
onfigures the port to deny access to all clients, either
.
C
E
ot1x port-control
This comm
• auto – Requires a dot1x-aware connected
RADIUS server. Clients that are not dot1x-awa
dot1x-aware or otherwise.
• force-unauthorized – C
ware or otherwise dot1x-a
Default
force-authorized
ommand Mode
Interface Configuration
xample
dot1x operation-mode
This command allows single or multiple hosts (clients) to connect to an
ort. Use the no form with no keywords to restore the default
to
re
S
d
n
nnect to this port.
D
-host
Command Mode
802.1X-authorized p
single host. Use the no form with the multi-host max-count keywords to
store the default maximum count.
yntax
ot1x operation-mode {single-host | multi-host [max-count count]}
o dot1x operation-mode [multi-host max-count]
• single-host – Allows only a single host to connect to this port.
• multi-host – Allows multiple host to co
• max-count – Keyword for the maximum number of hosts.
- count – The maximum number of hosts that can connect to a port.
(Range: 1-20; Default: 5)
efault
Single
Interface Configuration
Example
4-84