Asus GigaX2024SX - Manual (Page 187)

Default Setting
1 stop bit
ommand Mode
fy 2 stop bits, enter this command:
C
Line Configuration
Example
To speci
disconnect
Use this command
Syn to terminate an SSH, Telnet, or console connection.
will disconnect the console connection.
any other identifiers for an active session will disconnect an SSH or
Telnet connection.
Example
tax
-id disconnect session
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)
Command Mode
Privileged Exec
Command Usage
session identifier “0” Specifying
Specifying
Related Commands
show ssh (4-56)
show users (4-85)
show line
This command displays the terminal line’s parameters.
Syn
sho
• co
• vt
., Telnet).
leged Exec
tax
w line [console | vty]
nsole - Console terminal line.
s (i.e y - Virtual terminal for remote console acces
Default Setting
all lines Shows
Command Mode
ivi Normal Exec, Pr
Example
To show all lines, enter this command:
4-19