Asus GigaX2024SX - Manual (Page 215)

logging host
This command adds a syslog server host IP address that will receive logging
remove a syslog server host.
g
sing this command more than once you can build up a list of host IP
IP addresses allowed is five.
messages. Use the no form to
Syntax
[no] logging host host_ip_address
host_ip_address - The IP address of a syslog server.
Default Settin
None
Command Mode
Global Configuration
Command Usage
• By u
addresses.
• The maximum number of host
Example
logging facility
This command sets the facility type for remote logging of syslog messa
the no form to return the type to the default.
Syntax
ges. Use
er to
o an appropriate service. (Range: 16-23)
reported by the switch.
syslog server to sort messages or to store
[no] logging facility type
type - A number that indicates the facility used by the syslog serv
dispatch log messages t
Default Setting
23
Command Mode
Global Configuration
Command Usage
The command specifies the facility type tag sent in syslog messages. (See RFC
164.) This type has no effect on the kind of messages 3
However, it may be used by the
messages in the corresponding database.
Example
4-47