Asus GigaX2024SX - Manual (Page 236)

• The system prompts for data required to complete the copy command.
• The destination file name should not contain slashes (\ or /), the leading letter of
the file name should not be a period (.), and the maximum length for file names on
127 characters or 31 characters for files on the switch. (Valid
characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• Due to the size limit of the flash memory, the switch supports only two operation
s on available
opy from the factory
n file, but you cannot use it as the destination.
• e startup-config as the
de
•
to another unit. Use the
co ote unit to the local unit.
• r downloaded from the TFTP
use a direct console connection and access the download menu
during a boot up to download the Boot ROM (or diagnostic) image. See
“U
•
cing the Default
ate” on page 3-56. For information on configuring the switch to
ip http secure-server” on page
E
T
on
th
the TFTP server is
code files.
• The maximum number of user-defined configuration files depend
memory.
• You can use “Factory_Default_Config.cfg” as the source to c
default configuratio
To replace the startup configuration, you must us
stination.
Use the copy file unit command to copy a local file
py unit file command to copy a file from a rem
The Boot ROM and Loader cannot be uploaded o
server. You must
pgrading Firmware via the Serial Port” on page B-1 for more details.
For information on specifying an https-certificate, see “Repla
Secure-site Certific
use HTTPS/SSL for a secure connection, see “
4-43.
xample
he following example shows how to upload the configuration settings to a file
e TFTP server:
The following example shows how to copy the running configuration to a startup
file.
The following example shows how to download a configuration file:
4-68