Asus GigaX2024SX - Manual (Page 290)

Command Usage
Actual rate limit = Rate limit level * Granularity
xample E
rate-limit granularity
efine the rate limit granularity for the Fast Ethernet ports,
and the Gigabit Ethernet ports. Use the no form of this command to restore the
ra itethernet} granularity [granularity]
no et | gigabitethernet} granularity
• fa et granularity
• gi thernet granularity
• gr r the system. For Fast Ethernet,
. For Gigabit Ethernet, only one
ted, 33.3 Mbps
s
Mbps
Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit Ethernet
s.
Use this command to d
default setting.
Syntax
te tethernet | gigab -limit {fas
rate-limit {fastethern
stethernet – Fast Ethern
bit E gabitethernet – Giga
anularity – Sets rate limit granularity fo
bps, 1 Mbps, or 3.3 Mbps choose 512 K
granularity option is suppor
Default Setting
Fast Ethernet interface – 3.3 Mbp
thernet interface – 33.3 Gigabit E
Command
granularity to 33.3 Mbp
show rate-limit
Use this command to display the rate limit granularity.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Privileged Exec
Command Usage
4-122