Igmp query commands (layer 2), Igmp query commands (layer 2) -186, He associated primary vlan. fo – Asus GigaX2024SX User Manual

Page 354: If pvlan type is “promiscuous,” then specify t

4-186

IGMP Query Commands (Layer 2)

ip igmp snooping querier
This command enables the switch as an IGMP querier. Use the no form to disable
it.
Syntax

[no] ip igmp snooping querier

Default Setting

Enabled

Command Mode

Global Configuration

Command Usage
If enabled, the switch will serve as querier if elected. The querier is responsible for
asking hosts if they want to receive multicast traffic.
Example

ip igmp snooping query-count
This command configures the query count. Use the no form to restore the default.
Syntax

ip igmp snooping query-count count
no ip igmp snooping query-count

count - The maximum number of queries issued for which there has been no

response before the switch takes action to drop a client from the

multicast group. (Range: 2-10)

Default Setting