Asus GigaX2024SX - Manual (Page 45)

Figure 3-12. Setting the Startup Configuration Settings
CLI – Enter the IP address of the TFTP server, specify the source file on the
server, set the startup file name on the switch, and then restart the switch.
To select another configuration file as the start-up configuration, use the boot
system command and then restart the switch.
Console Port Settings
You can access the onboard configuration program by attaching a VT100
compatible device to the switch’s serial console port. Management access
through the console port is controlled by various parameters, including a
password, timeouts, and basic communication settings. These parameters can be
configured via the Web or CLI interface.
Command Attributes
eout – Sets the interval that the system waits until user input is
ut is not detected within the timeout interval, the current
• Login Timeout – Sets the interval that the system waits for a user to log into the
CLI. If a login attempt is not detected within the timeout interval, the connection is
terminated for the session. (Range: 0-300 seconds; Default: 0)
• Exec Tim
detected. If user inp
session is terminated. (Range: 0-65535 seconds; Default: 0 seconds)
3-20