Asus GigaX2024SX - Manual (Page 155)

* Mapping specific values for IP Precedence is implemented as an interface
The DSCP is six bits wide, allowing coding for up to 64 different forwarding
behaviors. The DSCP replaces the ToS bits, but it retains backward compatibility
nce bits so that non-DSCP compliant, ToS-enabled devices,
with the DSCP mapping. Based on network policies, different kinds
of traffic can be marked for different kinds of forwarding. The DSCP default values
the following table. Note that all the DSCP values that are not
Mapping DSCP Priority
with the three precede
will not conflict
are defined in
specified are mapped to CoS value 0.
Command Attributes
ble – Shows the DSCP Priority to CoS map.
alue – Maps a CoS value to the selected DSCP Priority
value. Note that “0” represents low priority and “7” represent high priority.
• DSCP Priority Ta
• Class of Service V
Note: IP DSCP settings apply to all interfaces.
3-130