Asus GigaX2024SX - Manual (Page 314)

Syn
[no] spanning-tree edge-port
face Configuration (Ethernet, Port Channel)
C
• You can enable this option if an interface is attached to a LAN segment that is at
the
Since end nodes cannot cause
they can pass directly through to the spanning tree forwarding
stat des quicker convergence for devices such as
rvers, retains the current forwarding database to reduce the
amount of frame flooding required to rebuild address tables during reconfiguration
ause the spanning tree to initiate reconfiguration when the
emember that Edge Port should only be enabled for ports connected to
e device.
st.
Example
tax
Default Setting
Disabled
Command Mode
Inter
ommand Usage
end of a bridged LAN or to an end node.
forwarding loops,
e. Specifying Edge Ports provi
workstations or se
events, does not c
interface changes state, and also overcomes other STA-related timeout problems.
However, r
an end-nod
• This command has the same effect as the spanning-tree portfa
Related Commands
spanning-tree portfast (4-192)
4-146