Asus GigaX2024SX - Manual (Page 269)

mac access-group (4-133)
map access-list mac
ts the output queue for packets matching an ACL rule. The
spe packet to an output queue;
e packet itself. Use the no form to remove the CoS mapping.
an ACL mask before you can map CoS values to the rule.
f the output
shown below.
This command se
cified CoS value is only used to map the matching
it is not written to th
Syntax
[no] map access-list mac acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure
• A packet matching a rule within the specified ACL is mapped to one o
queues as
Example
Related Commands
queue cos-map (4-226)
show map access-list mac (4-135)
show map access-list mac
This command shows the CoS value mapped to a MAC ACL for the current
interface. (The CoS value determines the output queue for packets matching an
ACL rule.)
Syntax
show map access-list mac [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Example
Related Commands
4-101