Asus GigaX2024SX - Manual (Page 73)

• x client software
installed and properly configured.
nt.)
nt also have to support the same EAP
port in Windows,
bally for the switch system before port
802.1x System Authentication Control – The global setting for 802.1x.
rity, 802.1X,Information.
Each client that needs to be authenticated must have dot1
• The RADIUS server and 802.1x client support EAP. (The switch only supports
EAPOL in order to pass the EAP packets from the server to the clie
• The RADIUS server and clie
authentication type – MD5. (Some clients have native sup
otherwise the dot1x client must support it.)
Displaying 802.1x Global Setting
The 802.1x protocol must be enabled glo
settings are active.
Command Attributes
•
Web –click Secu
Figure 3-30. 802.1x Information
CLI – This example shows the default global setting for 802.1x.
Configuring 802.1x Global Settings
The 802.1x protocol provides client authentication. The 802.1X protocol must be
nabled globally for the switch system before port settings are active.
d 802.1x globally for the
e
Command Attributes
• 802.1x System Authentication Control – Sets the global setting for 802.1x.
(Default: Disabled)
Web – Select Security, 802.1x, Configuration. Enable
3-48