Asus GigaX2024SX - Manual (Page 49)

Configuring Event Logging
The switch allows you to control the logging of error messages, including the type
of events that are recorded in switch memory, logging to a remote System Log
plays a list of recent event messages.
to RAM or flash memory.
ermanently stored
work problems. Up to 4096 log entries
y, with the oldest entries being overwritten first
s) has been exceeded.
that
t levels 0 to 3 to be
gged to flash and levels 0 to 7 to be logged to RAM.
cified level. For example, if level 3 is specified,
all messages from level 0 to level 3 will
(syslog) server, and dis
System Logs Configuration
The system allows you to enable or disable event logging, and specify which
levels are logged
Severe error messages that are logged to flash memory are p
in the switch to assist in troubleshooting net
can be stored in the flash memor
when the available log memory (256 kilobyte
The System Logs page allows you to configure and limit system messages
are logged to flash or RAM memory. The default is for even
lo
Command Attributes
• System Log Status – Enables/disables the logging of debug or error messages
to the logging process. (Default: Enabled)
• Flash Level – Limits log messages saved to the switch’s permanent flash
memory for all levels up to the spe
be logged to flash. (Range:0-7, Default: 3)
3-24