Ocean Optics S2000 - Manual (Page 87)

CC-3 Cosine-corrected Irradiance Probes
The CC-3 C OSINE - CORRECTED I RRADIANCE P ROBES are spectroradiometric sampling optics designed to collect
radiation (light) from a 180° field of view, thus eliminating light collection interface problems inherent to other
sampling devices. The CC-3 C
OSINE - CORRECTOR (300-1000 nm) has glass diffusing material. The CC-3-UV
C OSINE - CORRECTOR (200 nm to 2 µ m) has Teflon  diffusing material. The diffusing material is a thin disk that
sits at the end of the barrel (the Teflon material is 0.30" thick). Both cosine correctors have a 0.25" OD barrel
with a smooth yet rugged black oxide finish.
Operation
Both cosine correctors have SMA 905 connectors for convenient coupling to optical fibers. Screw the CC-3 or
CC-3-UV onto the end of any SMA-terminated optical fiber, and the combination becomes a cosine-corrected
irradiance probe. When coupled to a spectrometer, these irradiance probes can be used to measure UV-A and
UV-B solar radiation, environmental light fields, lamps and other emission sources.
CC-3-UV Cosine Corrector -- Function Test
Specifications
Fiber Optic Probes and Accessories: CC-3
- 87 -
Diffusing material: Opaline glass or Teflon
Barrel dimension: 0.25" OD
Sampling geometry: accepts light at/from 180 ° FOV
Connector: SMA 905